Light fixture with adjustable direct emission, with high-performance, LED light sources.‎ Pole installation.‎Available in two finishes: light grey painted and anthracite grey painted.‎ Composed by lighting unit and pole support.‎ Fixing is maintained by means of locking dowels.‎

The pole, not supplied, must have a ø 60mm and h90mm shank for the correct fixing of the head pole.‎ The pole height must be 4m from the ground to provide a correct surface lighting.‎ At these conditions, the poles can be installed at a distance of 15m, suitable for lighting a 4m carriageway in compliance with S3 class for cycle tracks.‎ Body in EN AB44100 aluminium, pole support in galvanized iron, silicone gaskets.‎ Electronic ballast integrated into the body.‎

The light fixture is protected from impulse overvoltage up to 4KV both in differential and common mode.‎Silicone-sealed silk-screened tempered glass.‎IP67 connector for electric connection to the mains, it can be housed in the pole compartment and is suitable for cables with a diameter of 5-13.‎5mm.‎LED circuits with PMMA lenses with road emission beam.‎White monochromatic LEDs available in 3 colour temperatures:Warm = 3000KNeutral = 4000KCold = 6000KScrews in AISI 316 stainless steel.‎ All parts in die-cast aluminium and galvanized iron are painted with 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.‎Technical features of light fixtures in compliance with EN60598-1 and part 2-5.‎ IP Rating IP65.‎ Insulation class II.‎

Material  :  Powder Coated Aluminium